Description:
1, Suitable for all process gaseous and liquid that do not attack copper alloy parts,
2, intended for adverse service conditions where pulsating or vibration exists, hydraulics, compressors
3, Longer lives
4,Do not use directly for medias that are viscos , crystallizing and corroding copper alloy.
Teknik Parametre:
| Model | Liquid Pressure Gauge with U clamp |
| Applications | 1,Used for hydraulic and pneumatic systems, compressors, compressed air system. 2,Suitable for fluid medium which does not clog thread or brass. 3,Used for providing protection from vibration and pulsation |
| Size(mm) | From Φ40mm to Φ150mm |
| Nominal size | From Φ1.5”to Φ6” |
| Scale ranges: | -0.1 -0 to 160Mpa Bar, Psi, Kpa, KG/CM2 pressure unit(optional) |
| Accuracy | 2.5% for Φ1.5”Φ 2”Φ 2.5” 1.6% for Φ4”Φ6” |
| Connection | 1/8”for Φ1.5” Φ2”Φ2.5” 1/4” for Φ1.5” Φ2” Φ2.5”Φ 4” 1/2” for Φ2.5”Φ 4” |
| Thread | NPT, BSP, PT, and so on |
| Wetted parts | Copper alloy |
| Case&Bezel Material | 304 stainless steel(316 stainless steel is approved) |
| Pencere | Tempered Glass, Polycarbonate |
| Pointer/Dial | Aluminum Finished |
| Operating Temperature | -4 F to 140 F(-20℃ to 60℃) |
| Media Temperature | 60℃ maximum |
| Filling | Glycerine oil or silicone oil |
| Pressure Limitation | Steady:75% of scale value Fluctuating: 65% of full scale value Short time:100% of full scale value |
